Design and Analysis of Injection Mould for Hydrogol Dripper

[Manjusha Narayane] Volume 2: Issue 3, Sept 2015, pp 122 - 129
---------------------------------------------------------------------------------------------
Abstract— In this project, a two plate injection mould design and mould flow analysis of 12-cavity injection mould for a given component was taken according to the customer requirement. Present mold 12-cavity injection mold for Irrigation valve found a defect as short filling. This projects aims to design and analysis of mould and proper correction of mould. Material selected for Plastic component “Irrigation Valve (Hydrogol Dripper)” was HDPE (High Density Polyethylene) . The 3-D model of the component and extraction of core and cavities was performed in Unigraphics (NX6) software. Drafting and detailing made on AutoCAD software. Auto Desk Mould Flow Analysis software is a powerful Analysis tool to analysis and predict the defects in the component.

Index Terms—Injection Mould, Mold
---------------------------------------------------------------------------------------------------------------------------------------------------------
REFERENCES 
[1]. J.A. Brydson, Plastic materials, Britsh Cataloging sixth editon, 195, Buterworth Heineman Ltd.
[2]. "Injection Mold Design Engineering", David Kazmer by Hanser, 2007.
[3]. Bown, J., ―Injection Moulding of Plastic Components‖, McGraw-Hil, 1979, Mould design, htp:/www. dow.com /Styron/design/guide. 
[4]. Technical paper by Johana Lamminmaki, Toti Lindgren, Juka Silen and Heli Vesanto, ―Influence of injection moulding proces parameter on mechanical properties of polyacetal –specimen‖.
[5]. Design Solutions Guide, htp:/www.honeywel plastics.com 
[6]. Technical Directory on design and Toling for plastics, CIPET, Guindy ,Chenai . 
[7]. Manzione,L.T., Aplications of Computer Aided Enginering in Injection Moulding,Hanser, NewYork,1987. 
[8]. Saman, A.M. Abdulah, A. H, Nor,MAM. Computer Simulation aportunity in Plastic injection Mould Development for Automotive part. International conference on Computer Technology and Development. 
[9] Technical paper by Pankaj Shakarwal and LipinYadav‘ ‗‘Design and Mould Flow Analysis of Injection Mould for Conecting Link‘'. 
[10] Rosato, D;Donald,D;Marlene,D, 2000. Injection molding handbook. 3rd ed., Norwell massachusetts 02061: Kluwer Academic Publishers. 
[11] UddeholmMoulding. 2004. Steels for moulds. [ONLINE] Available at: http://www.uddeholm.co.jp/pdf/mould-english.pdf, Sept 11.
[12] Injection mold making and molding. 2009. Injection mold sprue and runner. [ONLINE] Available at: http://imoldmaking.com/mold-making-2/mold-design/runner-andgate/injection-mold-sprue-and-runner/, 21October 11. 
[13] Herbert, R, Understanding Injection Mold Design. 1st ed. Cincinnati, USA: hanser Gardner Publications. 2001 
[14] Recent methods for optimization of plastic injection molding process -- A retrospective and literature review, Author - Bharti, P. K.; Singh, Harbinder; Khan, M. I. September 2012. [15] A 3D CAD knowledge-based assisted injection mould design system, Author: Chan, W. M.; Yan, L.; Xiang, W.; Cheok, B. T., October 2003. 
[16] Moldmaker Uses an In-Depth Analytical Solution-Based Approach To Mold Flow Analysis, Author: Carrabine, Laura, August 2008) 
[17] Processing parameters influencing energy efficient injection moulding of plastics and rubbers. Author: GODEC, Damir; RUJNIĆ-SOKELE, Maja; ŠERCER, Mladen. July 2012.
-----------------------------------------------------------------------------------------------------------------------------------------------------------


Popular Posts