Design and Implementation of Energy Audit with IOT and ARDUINO

[Prof. Pravin Balbudhe, Barkha Jais, Payal Burbure, Kajal Kalbende, Shweta Warkad, Ashwini Hemane] Volume 6: Issue 1, March 2019, pp 25 - 29  

DOI: 10.26706/IJAEFEA.1.6.20190308

----------------------------------------------------------------------------------------------
Abstract This project develop for in industry to save not needed circumstances consumption of energy and to known what is exact requirement of industry and it is also developed for analysis the system, hence the proposed system is taking this development at next level by enhancing the term IoT(Internet Of Things) for industrial remote energy parameter monitoring system.
The objective of energy audit is to identify the end use of energy in industry, and this feasibility study leads to implementation of energy management program. Remote monitoring of different industries sensor, machineries, energy or the power panels are the most demanding products and many organizations are working on it. Up till now we have seen only computers, mobiles and very few device are connected to internet directly.
Still many embedded system or the devices needs to redesign so that they can communicate with other world through the internet. In simple word we called it as a IoT(Internet of Things). By using IoT device we are developing project named as “Design and Implementation of Energy audit with IOT and ARDUINO”.

Index terms - Internet of Things (IoT); Arduino board; GSM Modem; Microcontroller ATMega328P; Modbus-RS232 converter 
---------------------------------------------------------------------------------------------------------------------------------------------
REFERENCES
[1] P. Jadhao, K. Mankar “A Review On Energy Consumption Monitoring And Analysis System”, International Research Journal on Engineering and Technology Vol.3, Issue1, January 2016.

[2] P. Thamarai, R. Amudhevalli, “Energy Monitoring System USING PLC & SCADAS ”, International Journal of Advanced Research in Electrical, Electronics and Instrumentation Engineering, Vol. 3, Issue 2, Febuary 2014.

[3] Hong-Chan Chang and Cheng-Chien Kuo, “Wireless Energy Management System for Residential Area”, International Journal of Environmental Science and Development, Vol. 4, No. 5, October 2013.

[4]  Adnan Rashdi, Rafia Malik, Islamabad, Pakistan, “Remote Energy Monitoring, Profiling and Control Through GSM Network”, International Conference on Innovations in Information Technology (IIT) 2012.

[5] Himshekhar Das, L.C.Saikia, “GSM Enabled Smart Energy Meter and Automation of Home Appliances”, PP-978-1-4678-6503-1, 2015 IEEE.

[6] Cheng Pang,Valierry Vyatkin,Yinbai Deng, Majidi Sorouri, “Virtual smart metering in automation and simulation of energy efficient lighting system” IEEE 2013.

[7] Amit Bhimte, Rohit K.Mathew, Kumaravel S, “Development of smart energy meter in labview for power distribution systems”, “IEEE INDICON 2015 1570186881”, 2015.

[8]  H. Arasteh, V. Hosseinnezhad, V.Loia, A.Tommasetti, O.Troisi, M.Shafie Khan, P.Siano, “IoT Based Smart Cities: A survey” IEEE 978-1-5090-2320-2/1631.00,2016.
----------------------------------------------------------------------------------------------------------------------------------------------

Popular Posts