Design and Manufacturing of 3-Axis Portable Machine With Criss Cross Mechanism

[S. A. Karve, Ajit Doiphode, Shantunjay Biradar, Rupam Shinde] Volume 6: Issue 2, May 2019, pp 44 - 48 

DOI: 10.26706/IJAEFEA.2.6.20190406

----------------------------------------------------------------------------------------------
Abstract Lift is a straightforward mechanical gadget used to raise component or item from ground level to a specific stature to play out a particular work with most extreme burden and least endeavors. This task portrays the structure just as examination of scissor lift which will be worked on DC engines. Additionally such structure can make the lift increasingly minimized and much reasonable for medium scale work. In any case, for this situation alongside lifting material we are additionally going to attempt to move the material at an equivalent stature various way. The upper base or board will be moved with the assistance of lead screw which is worked by DC engine. At long last, the investigation will be completed so as to check the similarity of the plan esteems.

Index terms - Portable, 3-Axis, Scissor Mechanism, Drilling.
---------------------------------------------------------------------------------------------------------------------------------------------
REFERENCES
[1] Shinde Nikhil, Vishwakarma Prem, Sanjay Kumar, Godse Rahul, P.A. Patil, “Design & Development of Twin Drill Head Machine and Drilling Depth Control”, International Journal of Innovative Research in Science, Engineering and Technology, Vol. 4, Issue 5, May 2015.

[2] A.S. Udgave, Prof.V.J. Khot, “Design & development of multi spindle drilling head (msdh)”, IOSR Journal of Mechanical and Civil Engineering,  Vol. 11, PP: 60-69.

[3] Pravin A. Desai and Vishal V. Jadhav, “Design of Multi Spindle Drilling Machine, International Journal of Design and Manufacturing Technology”, 2017, pp. 01

[4]  Ajay Kumar Singh, Nishant Moona,“Design of a Universal Micro Radial Drilling Machine” International Journal of Science Technology & Engineering, Volume 2, Issue 09, March 2016

[5] R.Anandhan, P.Gunasekaran, D.Sreenevasan, D.Rajamaruthu,“Design and Fabrication of Angular Drilling Machine”, International Journal of Innovative Research in Science, Engineering and Technology, Vol. 5, Issue 8, May 2016.

[6] Amay Saxena, “Deriving a Generalized, Actuator Position-Independent, Expression for the Force Output of a Scissor Lift”, University of California, Berkeley, 2016.


[7]   Suraj B. Dhanawade, Shubham S. Bhujbal, Rohan R. Dhane, Prof. Rahul R. Narkar, Prof. Sangram S. Bhosale, “Design, Analysis and Development of Hydraulic Scissor Lift”, International Journal of Advance Engineering and Research Development, Volume 4, Issue 3, March -2017.
----------------------------------------------------------------------------------------------------------------------------------------------

Popular Posts