Review on Properties of Natural Hybrid Composites

[Mohammad Punawala, Mayur PatilShubham RautVivek Rathod,  A. N. Shaikh,  R. M. Deshmukh] Volume 6: Issue 2, May 2019, pp  93 - 98

DOI: 10.26706/IJAEFEA.2.6.20190413

----------------------------------------------------------------------------------------------
Abstract Due to environment and sustainability issues, there has been remarkable development in the natural fibre-based composites. There is increased in utilization of natural fibre to obtain high performance composite material. The challenge of working with the natural fibre-based composites is that they have large variation of physical as well as chemical properties by introducing synthetic fibre along with the natural fibre and by chemical treating the natural fibre there is been increment in the performance and characteristic of the natural hybrid composites. Also factors like fibre type, environmental condition, type of reinforcement used, source, type, structure, composition of the ply effects on the hybrid composite properties. Further the mechanical properties of natural hybrid composite have been discussed.

Index terms - natural fibre, hybrid composite, chemical treatment, tensile strength
---------------------------------------------------------------------------------------------------------------------------------------------
REFERENCES
[1] S. Nallusamy and Gautam Majumdar. “Effect of Stacking Sequence and Hybridization on Mechanical Properties of Jute-Glass Fiber Composites”. International Journal of Performability Engineering, Vol. 12, No.3, May 2016, pp. 229-239.
[2] Raghavendra Gujjala, Shakuntala Ojha, SK Acharya, SK Pal. “Mechanical properties of woven jute–glass hybrid-reinforced epoxy composite”. Journal of Composite Materials.
[3] Andrzej K. Bledzki, Omar Faruk, Mohini Sain, Hans-Peter Fink. “Progress Report on Natural Fibre Reinforced Composites”, Macromol. Mater. Eng. 2014, 299, 9–26
[4] Madhu Puttegowda, Sanjay Mavinakere Rangappa, Mohammad Jawaid, Pradeep Shivanna, Yogesh Basavegowda and Naheed Saba.  “Potential of natural/synthetic hybrid composites for aerospace applications”. Elsevier Ltd 2018.
[5]  Khan MA, Hinrichsen G Mohanty AK, “Surface modification of jute and its influence on performance of biodegradable jute fabric/biopal composites”. Composites Science and Technology.
[6] Mäder E, Doan TTL, Gao SL.” Jute/polypropylene composites: Effect of matrix modification”. Composites Science and Technology.
[7]  Reboredo MM, Marcovich NE, Acha BA. “Creep and dynamic mechanical behavior of PP–jute composites: effect of the interfacial adhesion”. Composites Part A: Applied Science and Manufacturing2007.
[8] Ahmad MA, Haque M, Zaman HU, Khan RA, Khan MA, Khan A, Huq T, Noor N Rahman KM, Rahman M, Huq D. “Preparation and mechanical characterization of jute reinforced polypropylene/ natural rubber composite”. Journal of Reinforced Plastics and Composites 2010.
[9] Vijayarangan S, Sabeel Ahmed K, Naidu ACB. “Elastic properties, notched strength and fracture criterion in untreated woven jute–glass fabric reinforced polyester hybrid composites”. Materials and Design 2007.
[10] Benjamin Bax, Jörg Müssig. “Impact and tensile properties of PLA/Cordenka and PLA/flax composites”. Composites Science and Technology, Elsevier, 2009, 68 (7-8), pp.1601.
[11] Yongli Zhang, Yan Li, Hao Ma, Tao Yu. “Tensile and interfacial properties of unidirectional flax/glass fibre reinforced hybrid composites”. Composites Science and Technology 88 (2013) 172–177.
[12]  V Fiore, A Valenza, G Di Bella.” Mechanical behavior of carbon/flax hybrid composites for structural applications”. Journal of Composite Materials 46(17).
[13] Kulinski Z, Pracella M, Anguillesi I, Chionna D, Piorkowska E. “Functionalization, compatibilization and properties of polypropylene composites with hemp fibres”. Composites Science and Technology 2006.
[14] Liu Q, Hughes M, McCall RD, Stuart T, Sharma HSS, Norton A. “Structural bio composites from flax: Effect of bio-technical fibre modification on composite properties”. Composites Part A: Applied Science and Manufacturing 2006.
[15] De Coster A, Van de Weyenberg I, Kino B, Ivens J, Baetens E, Verpoest I.  “Influence of processing and chemical treatment of flax fibre on their composites”. Composites Science and Technology 2003.
[16] L. Torre, C. Santulli, D. Puglia, R. Petrucci, F. Sarasini, J.M. Kenny. “Mechanical characterisation of hybrid composite laminates based on basalt fibres in combination with flax, hemp and glass fibres manufactured by vacuum infusion”. Materials and Design 49 (2013) 728–735.
[17] Asim Shahzad. “Impact and fatigue properties of hemp–glass fibre hybrid bio composites”. Journal of Reinforced Plastics and Composites 2011.
[18] Bourmaud A, Baley C. “Rigidity analysis of polypropylene/vegetal fibre composites after recycling”. Polymer Degradation and Stability 2009.
[19] Bruce DM, Hepworth DG, Farrent JW, Hobson RN. “The use of unretted hemp fibre in composite manufacture”. Composites Part A: Applied Science and Manufacturing ,31:1279–83.
[20] Menut P, Guilbert S, Morel MH, Kunanopparat T. “Reinforcement of plasticized wheat gluten with natural fibres: from mechanical improvement to deplasticizing effect”. Composites Part A: Applied Science and Manufacturing 2008.
[21] M.A. Malequea, M. Iqbalca., M. Jawaid, A. Atiqah. “Development of kenaf-glass reinforced unsaturated polyester hybrid composite for structural applications”. Composites: Part B 56 (2014) 68–7369.
[22] N. Venkateshwaren, N. Rajinia, S. Karthikeyana, A. Alavudeena, M. Thiruchitrambalam, “Mechanical properties of banana/kenaf fibre-reinforced hybrid polyester composites: Effect of woven fabric and random orientation”. Materials and Design 66 (2015) 246–257.
[23] Horstemeyer MF, Pittman Jr CU, Du Y, Xue Y, Zhang J, Lacy Jr TE, Toghiani H, “Kenaf bast fibre bundle-reinforced unsaturated polyester composites. III: Statistical strength characteristics and cost–performance analyses”. Forest Products Journal 2010,60:514–21.
[24] Thiruchitrambalam, A. ElayaPerumal, A. Alavudeen, M. N. Venkateshwaran. “Mechanical and water absorption behavior of banana/sisal reinforced hybrid composites”. Materials and Design 32 (2011) 4017–4021.
[25]  K. Palanikumarb, M. Ramesha, K. Hemachandra Reddy. “Comparative Evaluation on Properties of Hybrid Glass Fibre- Sisal/Jute Reinforced Epoxy Composites”. Procedia Engineering   51 (2013) 745 – 750.
[26] Towo AN, Ansell MP. “Fatigue of sisal fibre reinforced composites: constant-life diagrams and hysteresis loop capture”. Composites Science and Technology 2008; 68:915–24.
[27] S. Junaid Kokan, B. Vijaya Ramanathan, R. Niranjan Raja, C. Elanchezhian, R. Sathyanarayanan, A. Rajendra Prasad, V.M. Manickavasagam. “Evaluation of mechanical properties of abaca–jute–glass fibre reinforced epoxy composite”. materials and Design 51 (2013) 357–366.
[28]  Gurunathan T, Mohanty S, Sanjay Nayak K. A review of the recent developments in bio composites based on natural fibres and their application perspectives. Composite A: Application Sci Manufacturing 2015,77:1—25.
[29]  I, Baharum, Ahmad, A and Abdullah, I, “Effect of Extrusion Rate and Fibre Loading on Mechanical Properties of Twaron Fibre-thermoplastic Natural Rubber (TPNR) composites”. Reinforced Plastics & Composites journal , 2006, Vol. 25, pp. 957-965.
[30] M. Jawaid, A. Abu Bakar, H.P.S. Abdul Khalil, P. Noorunnisa Khanam. “Chemical resistance, void content and tensile properties of oil palm/jute fibre reinforced polymer hybrid composites”. Materials and Design 32 (2011) 1014–1019.
[31]  Lopez Manchando, Marc Arroya, Jose Kenny, J. Biagiotti “Enhancement of Mechanical Properties and Interfacial Adhesion of PP/EPDM/Flax Fibre Composites Using Maleic Anhydride as a Compatibilizer”, Journal of Applied Polymer Sci, Vol. 90, pp. 2170.
[32] B.S., Rana, A., Panigrahy, P. and Panigrahi, Chang, “Overview of Flax Fibre Reinforced Thermoplastic Composites”. Canadian Biosystems Engineering Journal, 06-165, pp. 1-12.
[33] LaythMohammed, M. N. Ansari, Grace Pua, Saiful Islam, Mohammad Jawaid. “A Review on Natural Fibre Reinforced Polymer Composite and Its Applications”. Int Journal of Polymer Sci Volume 2015.
----------------------------------------------------------------------------------------------------------------------------------------------




Popular Posts