Design and Analysis of All Terrain Vehicle for Agricultural Transportation

Ashwin A. Kamble, Amar M. Borawake, Yogesh S. Khandebharad, Bhavesh R. Bhagat, Pratik P. Vaidya
Volume 5: Issue 1, March 2018, pp 13-17


Author's Information
Ashwin A. Kamble1 
Corresponding Author
1Department of Mechanical Engineering, JSPM Narhe Technical Campus, Pune, Maharashtra, India

Amar M. Borawake, Yogesh S. Khandebharad, Bhavesh R. Bhagat, Pratik P. Vaidya
2Department of Mechanical Engineering, JSPM Narhe Technical Campus, Pune, Maharashtra, India


Research Article -- Peer Reviewed
Published online – 05 April 2018

Open Access article under Creative Commons License

Cite this article – Ashwin A. Kamble, Amar M. Borawake, Yogesh S. Khandebharad, Bhavesh R. Bhagat, Pratik P. Vaidya, “Design and Analysis of All Terrain Vehicle for Agricultural Transportation”, International Journal of Analytical, Experimental and Finite Element Analysis, RAME Publishers, vol. 5, issue 1, pp. 13-17, March 2018.
https://doi.org/10.26706/IJAEFEA.1.5.20180305


Abstract:-
The objective is to design an ATV to work in Agriculture farm. It has to ensure that the vehicle spastics the limits of set rules. This vehicle must be capable of negotiate with confidence and ease. The vehicle is divided into its major component and subsystems. The major focus is towards explaining the procedure and methodology used for designing key components of off road vehicle.
Index Terms:-
ATV, agriculture, suspension system
REFERENCES
[1] Trammell, S.R., Lorenzo, D.K. and Davis, B.J., “Integrated hazard analysis: using the strengths of multiple methods to maximize the effectiveness”, Professional Safety, Vol. 49 No. 5, pp.29-37, 2004.

[2] John C. Dixon, “Suspension analysis and computation geometry”, ISBN: 978-0-470-51021-6; October 2009

[3] Shpetim Lajqi, Stanisla Pehan, “Design of Independent Suspension Mechanism for a terrain vehicle with fourwheel drive and four wheels steering”, International Journal of Engineering, 2013

[4] Ahmad Keshavarzi, “Optimization of Double Wishbone System with Variable Camber angle by HydraulicMechanism”, World Academy of Science, Engineering and Technology, 2010.

[5] Lee, D. C., Choi, H. S., Han, C. S., “Design of Automotive Body Structure Using Multicriteria Optimization”, Journal of Structural and Multidisciplinary Optimization, Vol. 32, 2006, pp. 161-167.

[6] Lee J. N., Nikravesh P. E., “Steady State Analysis of Multibody Systems with Reference to Vehicle Dynamics”, Journal of Nonlinear Dynamics, Vol. 5, 1994.


To view full paper, Download here


To View Full Paper

Publishing with