Review on Properties of Natural Hybrid Composites

Mohammad Punawala, Mayur Patil, Shubham Raut, Vivek Rathod, Prof. A. N. Shaikh, Prof. R. M. Deshmukh
Volume 6: Issue 2, May 2019, pp 93-98


Author's Information
Mohammad Punawala1 
Corresponding Author
1Mechanical Engineering Department, JSPM Narhe Technical Campus, Pune, India

Mayur Patil, Shubham Raut, Vivek Rathod, Prof. A. N. Shaikh, Prof. R. M. Deshmukh
1Mechanical Engineering Department, JSPM Narhe Technical Campus, Pune, India


Review Article -- Peer Reviewed
Published online – 30 May 2019

Open Access article under Creative Commons License

Cite this article – Rushikesh Salunkhe, Shriram Sonawane, Shardul Bhalerao, Nikhil Salunkhe, “Vibration Analysis for Bending of Vertical Plates in PVC Scrap Filtration Machine ”, International Journal of Analytical, Experimental and Finite Element Analysis, RAME Publishers, vol. 6, issue 2, pp. 93-98, May 2019.
https://doi.org/10.26706/ijaefea.2.6.20190413


Abstract:-
Due to environment and sustainability issues, there has been remarkable de-velopment in the natural fibre-based composites. There is increased in utilization of natural fibre to obtain high performance composite material. The challenge of working with the natural fibre-based composites is that they have large variation of physical as well as chem-ical properties by introducing synthetic fibre along with the natural fibre and by chemical treating the natural fibre there is been increment in the performance and characteristic of the natural hybrid composites. Also factors like fibre type, environmental condition, type of reinforcement used, source, type, structure, composition of the ply effects on the hybrid composite properties. Further the mechanical properties of natural hybrid composite have been discussed.
Index Terms:-
natural fibre, hybrid composite, chemical treatment, tensile strength
REFERENCES
[1] S. Nallusamy and Gautam Majumdar. “Effect of Stacking Sequence and Hybridization on Mechanical Properties of Jute-Glass Fiber Composites”. International Journal of Per-formability Engineering, Vol. 12, No.3, May 2016, pp. 229-239.

[2] Raghavendra Gujjala, Shakuntala Ojha, SK Acharya, SK Pal. “Mechanical properties of woven jute–glass hybrid-re-inforced epoxy composite”. Journal of Composite Materi-als.

[3] Andrzej K. Bledzki, Omar Faruk, Mohini Sain, Hans-Peter Fink. “Progress Report on Natural Fibre Reinforced Com-posites”, Macromol. Mater. Eng. 2014, 299, 9–26

[4] Madhu Puttegowda, Sanjay Mavinakere Rangappa, Mo-hammad Jawaid, Pradeep Shivanna, Yogesh Basavegowda and Naheed Saba. “Potential of natural/synthetic hybrid composites for aerospace applications”. Elsevier Ltd 2018.

[5] Khan MA, Hinrichsen G Mohanty AK, “Surface modifica-tion of jute and its influence on performance of biodegrada-ble jute fabric/biopal composites”. Composites Science and Technology.

[6] Mäder E, Doan TTL, Gao SL.” Jute/polypropylene compo-sites: Effect of matrix modification”. Composites Science and Technology.

[7] Reboredo MM, Marcovich NE, Acha BA. “Creep and dy-namic mechanical behavior of PP–jute composites: effect of the interfacial adhesion”. Composites Part A: Applied Sci-ence and Manufacturing2007.

[8] Ahmad MA, Haque M, Zaman HU, Khan RA, Khan MA, Khan A, Huq T, Noor N Rahman KM, Rahman M, Huq D. “Preparation and mechanical characterization of jute rein-forced polypropylene/ natural rubber composite”. Journal of Reinforced Plastics and Composites 2010.

[9] Vijayarangan S, Sabeel Ahmed K, Naidu ACB. “Elastic properties, notched strength and fracture criterion in un-treated woven jute–glass fabric reinforced polyester hybrid composites”. Materials and Design 2007.

[10] Benjamin Bax, Jörg Müssig. “Impact and tensile properties of PLA/Cordenka and PLA/flax composites”. Composites Science and Technology, Elsevier, 2009, 68 (7-8), pp.1601.

[11] Yongli Zhang, Yan Li, Hao Ma, Tao Yu. “Tensile and in-terfacial properties of unidirectional flax/glass fibre rein-forced hybrid composites”. Composites Science and Tech-nology 88 (2013) 172–177.

[12] V Fiore, A Valenza, G Di Bella.” Mechanical behavior of carbon/flax hybrid composites for structural applications”. Journal of Composite Materials 46(17).

[13] Kulinski Z, Pracella M, Anguillesi I, Chionna D, Piorkow-ska E. “Functionalization, compatibilization and properties of polypropylene composites with hemp fibres”. Compo-sites Science and Technology 2006.

[14] Liu Q, Hughes M, McCall RD, Stuart T, Sharma HSS, Nor-ton A. “Structural bio composites from flax: Effect of bio-technical fibre modification on composite properties”. Com-posites Part A: Applied Science and Manufacturing 2006.

[15] De Coster A, Van de Weyenberg I, Kino B, Ivens J, Baetens E, Verpoest I. “Influence of processing and chemical treat-ment of flax fibre on their composites”. Composites Science and Technology 2003.

[16] L. Torre, C. Santulli, D. Puglia, R. Petrucci, F. Sarasini, J.M. Kenny. “Mechanical characterisation of hybrid composite laminates based on basalt fibres in combination with flax, hemp and glass fibres manufactured by vacuum infusion”. Materials and Design 49 (2013) 728–735.

[17] Asim Shahzad. “Impact and fatigue properties of hemp–glass fibre hybrid bio composites”. Journal of Reinforced Plastics and Composites 2011.

[18] Bourmaud A, Baley C. “Rigidity analysis of polypropyl-ene/vegetal fibre composites after recycling”. Polymer Deg-radation and Stability 2009.

[19] Bruce DM, Hepworth DG, Farrent JW, Hobson RN. “The use of unretted hemp fibre in composite manufacture”. Composites Part A: Applied Science and Manufacturing ,31:1279–83.

[20] Menut P, Guilbert S, Morel MH, Kunanopparat T. “Rein-forcement of plasticized wheat gluten with natural fibres: from mechanical improvement to deplasticizing effect”. Composites Part A: Applied Science and Manufacturing 2008.

[21] M.A. Malequea, M. Iqbalca., M. Jawaid, A. Atiqah. “De-velopment of kenaf-glass reinforced unsaturated polyester hybrid composite for structural applications”. Composites: Part B 56 (2014) 68–7369.

[22] N. Venkateshwaren, N. Rajinia, S. Karthikeyana, A. Alavu-deena, M. Thiruchitrambalam, “Mechanical properties of banana/kenaf fibre-reinforced hybrid polyester composites: Effect of woven fabric and random orientation”. Materials and Design 66 (2015) 246–257.

[23] Horstemeyer MF, Pittman Jr CU, Du Y, Xue Y, Zhang J, Lacy Jr TE, Toghiani H, “Kenaf bast fibre bundle-reinforced unsaturated polyester composites. III: Statistical strength characteristics and cost–performance analyses”. Forest Products Journal 2010,60:514–21.

[24] Thiruchitrambalam, A. ElayaPerumal, A. Alavudeen, M. N. Venkateshwaran. “Mechanical and water absorption behav-ior of banana/sisal reinforced hybrid composites”. Materials and Design 32 (2011) 4017–4021.

[25] K. Palanikumarb, M. Ramesha, K. Hemachandra Reddy. “Comparative Evaluation on Properties of Hybrid Glass Fi-bre- Sisal/Jute Reinforced Epoxy Composites”. Procedia Engineering 51 (2013) 745 – 750.

[26] Towo AN, Ansell MP. “Fatigue of sisal fibre reinforced composites: constant-life diagrams and hysteresis loop cap-ture”. Composites Science and Technology 2008; 68:915–24.

[27] S. Junaid Kokan, B. Vijaya Ramanathan, R. Niranjan Raja, C. Elanchezhian, R. Sathyanarayanan, A. Rajendra Prasad, V.M. Manickavasagam. “Evaluation of mechanical proper-ties of abaca–jute–glass fibre reinforced epoxy composite”. materials and Design 51 (2013) 357–366.

[28] Gurunathan T, Mohanty S, Sanjay Nayak K. A review of the recent developments in bio composites based on natural fi-bres and their application perspectives. Composite A: Ap-plication Sci Manufacturing 2015,77:1—25.

[29] I, Baharum, Ahmad, A and Abdullah, I, “Effect of Extrusion Rate and Fibre Loading on Mechanical Properties of Twaron Fibre-thermoplastic Natural Rubber (TPNR) com-posites”. Reinforced Plastics & Composites journal , 2006, Vol. 25, pp. 957-965.

[30] M. Jawaid, A. Abu Bakar, H.P.S. Abdul Khalil, P. Noorun-nisa Khanam. “Chemical resistance, void content and tensile properties of oil palm/jute fibre reinforced polymer hybrid composites”. Materials and Design 32 (2011) 1014–1019.

[31] Lopez Manchando, Marc Arroya, Jose Kenny, J. Biagiotti “Enhancement of Mechanical Properties and Interfacial Ad-hesion of PP/EPDM/Flax Fibre Composites Using Maleic Anhydride as a Compatibilizer”, Journal of Applied Poly-mer Sci, Vol. 90, pp. 2170.

[32] B.S., Rana, A., Panigrahy, P. and Panigrahi, Chang, “Over-view of Flax Fibre Reinforced Thermoplastic Composites”. Canadian Biosystems Engineering Journal, 06-165, pp. 1-12.

[33] LaythMohammed, M. N. Ansari, Grace Pua, Saiful Islam, Mohammad Jawaid. “A Review on Natural Fibre Rein-forced Polymer Composite and Its Applications”. Int Jour-nal of Polymer Sci Volume 2015.


To view full paper, Download here


To View Full Paper

Publishing with