Combine Vertical Pipe Bending and Rolling Machine

S. A. Khapare, Kiran M. Shinde
Volume 6: Issue 2, May 2019, pp 53-58

Author's Information
S. A. Khapare1 
Corresponding Author
1Mechanical Engineering Department, JSPM Narhe Technical Campus, Pune, India

Kiran M. Shinde
1Mechanical Engineering Department, JSPM Narhe Technical Campus, Pune, India

Research Article -- Peer Reviewed
Published online – 30 May 2019

Open Access article under Creative Commons License

Cite this article – S. A. Khapare, Kiran M. Shinde, “Combine Vertical Pipe Bending and Rolling Machine ”, International Journal of Analytical, Experimental and Finite Element Analysis, RAME Publishers, vol. 6, issue 2, pp. 53-58, May 2019.

The study represents combination of pipe bending- rolling machine assembled vertical and which works on less supply of the input power. The both operations can be done on the same machine. The defects occurred are tedious to eliminate. The main objective behind this machine was to lower the space utilized by the machine and initial cost of it too.
Index Terms:-
Forming, Bending- Rolling, Bending.
[1] Prashant P. Khandare, Dhiral N. Patel, Mayur K. Aher, Ravi S. Parbat, Prof. Swapnil S. Paltil "Study of 3 roller portable pipe bending machine," International Journal of Advanced Technology in Engineering and Science, Vol. No 4 Issue 3, pp 320-326, March 2016.

[2] V. Senthil Raja, R. Maguteheswaran, C. Karthik, S. Rajjarajan, D. Shanmuga Vadivel "A new model in design and manufacturing of mobile hydraulic pipe bending machine in industry," IJERTVol.3 Issue 1,Pp 2706-2713,[ISSN: 2278-0181, January – 2014].

[3] Peter H. Watter, Raoul Plettke "Process model for the design of bent 3-dimensional free-form geometries for the three-roll-push-bending process" Forty Sixth CIRP Conference on Manufacturing Systems 2013,Pp 240-245.

[4] Akbar H Khan , Pravin K Ghule , Ranjit P Shingare, "Design development and experimental study of pipe bending machine" Journal of Industrial Engineering and its Applications, Volume 2 Issue 1,Pp 1-13.

[5] Basil E. Okaffor, Danviel Obiora Isiohia,“Development of a motorized pipe bend machine," IJET, Pp 305-312,May, 2014.

[6] Nang Liu, He Yeng, Heng Li, M. Zhan, ZhijuanThao, Xiao Hun, "Modelling of wrinkling in NC bending of thin-walled tubes with large diameters under multi-die constraints using hybrid method," 11th International Conference on Technology of Plasticity, [ICTP 2014, 19-24 October 2014, Pp 2171-2176, Nagoya, Japan].

[7] Y. Zhang, D. Redekop, "Shell element simulation of the push method of tube bending," Journal of Achievements in Materials and Manufacturing Engineering Volume 17 Issue 1-2Pp 301-304, July-August 2006.

[8] Yang He, LlHeng, Zhang Zhiyong, Zhan Mei, Liu Jing, Ll Guangjun, "Advances and trends on tube bending forming technologies, "Chinese Journal of Aerounatics 25 pp 1-12,(2012).

[9] Zbigniew Pater ,Arkadiusz Tofil, "FE simulation of the tube rolling process in diescher’s mill," Advances in Science and Technology Research Journal Volume 8, No. 22,Pp 51–55, June 2014.

To view full paper, Download here

To View Full Paper

Publishing with