Manufacturing of Nylon 6,6 Nanofibers using Electrospinning

Nand Jee Kanu, Sachin S. Chavan, Gajanan V. Jadhav, Nitin S. Hude, Rahul P. Ganesh, Jivan T. Patil
Volume 6: Issue 2, May 2019, pp 67-69


Author's Information
Nand Jee Kanu1 
Corresponding Author
1Mechanical Engineering Department, JSPM Narhe Technical Campus, Pune, India

Sachin Chavan2
2Bharati Vidyapeeth Deemed University College of Engineering, Pune, India


Amit Pawar, Sanket Patil, Bhushan Rane, Shubham Patil3
3Mechanical Engineering Department, JSPM Narhe Technical Campus, Pune, India


Research Article -- Peer Reviewed
Published online – 30 May 2019

Open Access article under Creative Commons License

Cite this article – Nand Jee Kanu, Sachin S. Chavan, Gajanan V. Jadhav, Nitin S. Hude, Rahul P. Ganesh, Jivan T. Patil, “Manufacturing of Nylon 6,6 Nanofibers using Electrospinning ”, International Journal of Analytical, Experimental and Finite Element Analysis, RAME Publishers, vol. 6, issue 2, pp. 67-69, May 2019.
https://doi.org/10.26706/ijaefea.2.6.20190404


Abstract:-
In the following paper manufacturing of nylon6,6 nanofibers using electrospinning and its experimental work is presented. Nanofibers were manufactured by electrospinning its solution. Fibers diameter were determined by electron microscope. The solvent used in the electrospinning solution of formic acid under the electric field of 22kv with flow rate of 0.4ml/hr. distance between syringe and drum 13cm. For 25ml of formic acid 3.6grams of nylon 6,6 was used, without altering room conditions.
Index Terms:-
Characterization, Electrospinning, Nylon6,6.
REFERENCES
[1] Lilia Muller Guerrini “Electrospinning and Characterization of polyamide 66 Nanofibers with different Molecular Weights, material Research” Vol. 12, No. 2, 181-190, 2009.

[2] Zheng-Ming Huang, “A review on polymer nanofibers by electrospinning and their applications in nanocomposites”, Composites Science and Technology 63 (2003) 2223–2253.

[3] Xiaomin Shi, Weiping Zhou, Delong Ma, Qian Ma, Denzel Bridges, Ying Ma, and Anming Hu, “Electrospinning of Nanofibers and Their Applications for Energy Devices” Hindawi Publishing Corporation Journal of Nanomaterials Volume 2015, Article ID 140716.

[4] Amar Shafrin Azizo, “Assessment of nylon 6, 6 nanofibre membrane for microalgae harvesting”, AIP Conference Proceedings 1891, 020032 (2017)

[5] Hassaneltrabi Tajuddin Alssir Ahmaydy, “The effect of solvent ratio on polystyrene and nylon 6,6 nanofibers membrane”, eProceedings Chemistry 2 (2016) 114-118.

[6] Hale Karakaş, “Electrospinning of nanofibers and their applications”, MDT ‘Electrospinning’.

[7] Jian Yao, “High Strength and High Modulus Electro spun Nanofibers”, Fibers 2014, 2, 158-187.

[8] GOLCHEHR AMINI, “Fabrication of Polyurethane and Nylon 66 Hybrid Electrospun Nanofiber Layer for Waterproof Clothing Applications”, Advances in Polymer Technology, 2015.

[9] M Joshia, A Bhattacharyya & S Wazed Ali “Characterization techniques for nanotechnology applications in textiles” Indian Journal of Fibre & Textile Research Vol 33, September 2008, pp. 304-317.


To view full paper, Download here


To View Full Paper

Publishing with