Design and Analysis of Nut and Bolt Separating Machine

S. B. Aswale; Anup Bijagare; D. B. Ghadage; P. V. Aptekar; S. B. Anpat

doi:10.26706/ijaefea.3.8.20210709

Design and Analysis of Nut and Bolt Separating Machine

Anup Bijagare, S. B. Aswale, D. B. Ghadage, P. V. Aptekar, S. B. Anpat
International Journal of Analytical, Experimental and Finite Element Analysis
Volume 8: Issue 3, July 2021, pp 97-101

Author's Information

S. B. Aswale²

Corresponding Author

²Student, Department of Mechanical Engineering, JSPM Narhe technical Campus, Narhe, Pune, India

aswalesudarshan@gmail.com

Anup Bijagare¹

¹Assistant Professor, Department of Mechanical Engineering, JSPM Narhe technical Campus, Narhe, Pune, India

S. B. Anpat¹, D. B. Ghadage¹, P. V. Aptekar¹

²Student, Department of Mechanical Engineering, JSPM Narhe technical Campus, Narhe, Pune, India

Research Paper -- Peer Reviewed

Published online – 28 July 2021

Open Access article under Creative Commons License

Cite this article – Anup Bijagare, S. B. Aswale, D. B. Ghadage, P. V. Aptekar, S. B. Anpat , “Design and Analysis of Nut and Bolt Separating Machine ”, International Journal of Analytical, Experimental and Finite Element Analysis, RAME Publishers, vol. 8, issue 1, pp. 97-101, 2021.

https://doi.org/10.26706/ijaefea.3.8.20210709

Abstract:-

The goal of the project is to design a system that can sort nut of different sizes. It would also be able to detect other objects in the process and reject them. The project will be aimed to provide the industry a real machine for direct use in packaging department at very economical price. The components of this nut sorter machines used DC wiper motors, some basic electronic components, Sorter trays. Speed, precision, and design must be at their highest level to succeed. A nut's size is used to sort nuts in this sorter. It is dispensed into the appropriate container based on its size. Structural analysis and model analysis is done for the sorter machine. Equivalent stresses, total deformation and factor of safety is checked. Design is safe.

Index Terms:-

FEA, sorter machine, static, nut, bolt

REFERENCES

S. P. Dabade and Rohan Prakash Chumble, “Automatic Sorting Machine Using Conveyor Belt,” Int. J. Innov. Emerg. Res. Eng., vol. 2, no. 5, pp. 66–70, 2015.

A. Patil, K. S. Rambhad, and D. R. Bele, “Concept of Jigs and Fixture Design – A Review,” Int. J. Anal. Exp. Finite Elem. Anal., vol. 4, no. 4, pp. 73–77, 2017, doi: 10.26706/ijaefea.4.4.20171004.

S. Adzimah and E. Seckley, “Modification in the design of an already existing palm nut - fibre separator,” African J. Environ. Sci. Technol., vol. 3, no. 11, pp. 387–398, 2009.

H. Ambule and K. Rambhad, “Methods of Improving Cutting Tool Life - A Review,” Int. J. Anal. Exp. Finite Elem. Anal., vol. 4, no. 4, pp. 78–79, 2017, doi: 10.26706/ijaefea.4.4.20171005.

M. Rokunuzzaman and H. P. W. Jayasuriya, “Development of a low cost machine vision system for sorting of tomatoes,” Agric Eng Int CIGR J., vol. 15, no. 1, pp. 173–180, 2013.

B. S. S. Srivastava Satyam; Vani, “Machine-vision based handheld embedded system to extract quality parameters of citrus cultivars,” J. Food Meas. Charact. New York, vol. 14, no. 5, pp. 2746–2759, 2020.

To view full paper, Download here